
Experiencing an issue with the trailer brake system. The front axle on my dual axle camper trailer stopped turning while pulling into a campsite, dragging and creating a rut in the grass. Received an error message about servicing the trailer brake system. After stopping, I unplugged the 7-way connector and reinserted it, allowing the trailer to roll again, but the error message remains. I cleaned both the plug and socket with an emery board and CRC contact cleaner. Still receiving the message when plugged in.
I am removing the HWH kick-down jack for repairs and need help with the pivot bolts. They are 1-5/15 hex head, 7/8" diameter bolts. I have applied penetrating oil but they are not budging. Has anyone had this issue removing the pivot bolts? What is the installation torque for these bolts?
Looking for suggestions for a portable A/C unit to supplement the dash A/C in an RV during a 7,000 mile trip.
I need a replacement converter/inverter for my 5th wheel. Have 2 12v batteries hooked up in parallel. I am a volunteer park host for Fresno county, California, and am 'permantly' located so use 12v system for the 22v lights etc only. And need to keep batteries charged.