Swift RV Repairs
Message this Provider Now
Write a Review
Share this Provider
Claim Provider
Latest Questions by the RV Community
Sikaflex 715 Leveling Concerns After Skylight Repair
I replaced the outer skylight shell on my Winnebago Vista and used Sikaflex 715 for sealing. It has good adhesion but is not leveling as expected after 2 days. I am concerned about water drainage from the skylight. What are your thoughts on improving leveling, and should I consider scraping it off and starting over?
Leveling Jack Beeping Issue on Holiday Rambler Endeavor
A 2004 Holiday Rambler Endeavor produces a loud beeping noise when the parking brake is released and the RV is in gear. The beeping stops when in neutral. All jacks are fully retracted. Automatic transmission fluid was added according to the manual, but the beeping continues. What else can be checked?
Difficulty Removing Pivot Bolts on HWH Jack
I am removing the HWH kick-down jack for repairs and need help with the pivot bolts. They are 1-5/15 hex head, 7/8" diameter bolts. I have applied penetrating oil but they are not budging. Has anyone had this issue removing the pivot bolts? What is the installation torque for these bolts?
Fresh Water Line Issue in 2017 Dutch Star 4018
There is no water getting from the fresh water tank to the fresh water pump in a 2017 Dutch Star 4018. The pump works when tested with auxiliary lines and a bucket of water, and the inline pump filter screen is clean. The motorhome has been set for 14 months with shore power after draining and refilling the water system to sanitize it twice.
Trailer Brake System Error Message
Experiencing an issue with the trailer brake system. The front axle on my dual axle camper trailer stopped turning while pulling into a campsite, dragging and creating a rut in the grass. Received an error message about servicing the trailer brake system. After stopping, I unplugged the 7-way connector and reinserted it, allowing the trailer to roll again, but the error message remains. I cleaned both the plug and socket with an emery board and CRC contact cleaner. Still receiving the message when plugged in.