Having trouble getting the lights to work with the plug-in cord for a 26 GMC 2500 Denali set up for flat towing. A company installed Blue Ox baseplates and an Air Force One braking system, but the wiring is not functioning correctly. They tried a Curt plug-and-play kit and a Blue Ox diode kit, but the lights still do not work. Seeking advice on resolving this issue.
I replaced the outer skylight shell on my Winnebago Vista and used Sikaflex 715 for sealing. It has good adhesion but is not leveling as expected after 2 days. I am concerned about water drainage from the skylight. What are your thoughts on improving leveling, and should I consider scraping it off and starting over?
The SW6DE water heater provides electric and propane heating. The propane side works, and the AC side has been tested for a stuck toggle switch, continuity, and resistance with no issues found. The heating element also shows continuity. The AC side does not produce hot water after 2 hours of operation. What steps should be taken next to diagnose the AC heating issue?
I am removing the HWH kick-down jack for repairs and need help with the pivot bolts. They are 1-5/15 hex head, 7/8" diameter bolts. I have applied penetrating oil but they are not budging. Has anyone had this issue removing the pivot bolts? What is the installation torque for these bolts?
I am having a hard time finding replacement glass for the rear slide out sliding window. It is double-paned, measuring approximately 25"H x 48" L.