
José and Caliber RV Inspection were great. He was more than on time and beat his schedule window. He was as professional as he was personable. He did a through job communicating his inspection of a used teardrop we're interested in buying. Not only did he point out his trailer opinions, but he went above and beyond to make sure systems were functioning correctly before testing. I wouldn't hesitate for a second for your RV inspection and service needs. Two thumbs up from us.
Half of the outlets are not powered, and the green light on the affected inverter is not lit. The Vegatouch indicates that inverter number two is not powered or charging. Shore power is connected and both lines are confirmed to be outputting 120V. The breaker/thermal on the Magna Inverter chassis is not popped. Questions include whether AC flow works if the inverter/charger is faulty, if the AC power doesn’t flow through during an internal failure of the Magna, how to test if the inverter is faulty, and whether there are GFCIs in the rig.
The SW6DE water heater provides electric and propane heating. The propane side works, and the AC side has been tested for a stuck toggle switch, continuity, and resistance with no issues found. The heating element also shows continuity. The AC side does not produce hot water after 2 hours of operation. What steps should be taken next to diagnose the AC heating issue?
I have a 1996 Newmar Kounty Aire 5th Wheel and want to install an Onan 4.0 RV GenSet. Is an outer case necessary for installation, or is it mainly for sound and heat protection? Also, the ID tag is worn and I'm unable to read the specs. Can anyone provide information or direct me to a manual or specifications?
I am removing the HWH kick-down jack for repairs and need help with the pivot bolts. They are 1-5/15 hex head, 7/8" diameter bolts. I have applied penetrating oil but they are not budging. Has anyone had this issue removing the pivot bolts? What is the installation torque for these bolts?